Founders offer: your first year of Pro for € 149 instead of € 203.88. Code OPRICHTER, until 31 December.First year of Pro € 149 with code OPRICHTERSee Pro

Guides

How to calculate square meters (and square feet) of a room or house

Updated on 8 min readBy Sam Schouten

Short answer: for a rectangular room, multiply length by width: 4.20 × 3.50 m = 14.70 m². Split an L-shaped room into rectangles and add them up, a triangle is half of base × height, and a half-round bay is π × r² ÷ 2. One square metre is 10.764 square feet. For a whole house, follow the measuring standard of the country: the Netherlands measures inside the outer walls (NEN 2580 and the Dutch measuring instruction), the US measures single-family homes to the outside of the walls (ANSI Z765).

Room areas are the numbers buyers read first on a listing plan, and the numbers clients check. Getting the arithmetic right is easy. Getting the rules right, what counts, where you measure from, which low ceilings drop out, depends on the country. This guide covers both.

The basic formula: length × width

Measure the room on the inside, wall to wall, at floor level. Multiply the two sizes in metres. Round the result to two decimals.

Example: a bedroom of 3.85 × 2.95 m. 3.85 × 2.95 = 11.3575, which you show as 11.36 m², or 11.4 m² if the client rounds to one decimal.

Work in metres, not centimetres. 385 × 295 gives 113,575, which is square centimetres; divide by 10,000 to get m². Mixing the two is the classic mistake on a quick calculation. Dimension lines on a sales plan are usually in metres, on an architect's drawing often in millimetres; floor plan symbols and abbreviations explains how to read them.

How to calculate the area of an L-shaped room

Split the shape into rectangles that do not overlap, calculate each, and add them up.

  1. Draw the outline and write every wall length on it.
  2. Draw one line across the inside corner, so you get two rectangles.
  3. Work out the missing sizes by subtraction. If the long wall is 6.00 m and the short leg is 2.40 m, the remaining part is 3.60 m.
  4. Calculate each rectangle and add them.
  5. Check by doing it the other way: the big bounding rectangle minus the missing corner. Both answers must match.

Example: a living room 6.00 m long. One part is 6.00 × 3.50 m = 21.00 m². A dining nook of 2.40 × 1.80 m sticks out on one side = 4.32 m². Total 25.32 m². Check: bounding box 6.00 × 5.30 = 31.80 m², minus the missing corner 3.60 × 1.80 = 6.48 m², gives 25.32 m². It matches.

The same method works for a T-shape, a U-shape or any room with straight walls at right angles: cut it into rectangles.

Want to try it? Open the sample home, no account needed.Want to try it on your computer? Email yourself the link.

Triangles and angled walls

A wall at an angle turns part of the room into a triangle. The area of a triangle is half of base × height, where the height is measured at a right angle to the base.

Example: a room of 4.00 × 3.00 m with one corner cut off diagonally. The cut-off triangle has legs of 1.20 m and 0.90 m. Its area is 1.20 × 0.90 ÷ 2 = 0.54 m². Room area: 12.00 − 0.54 = 11.46 m².

For a room with several angled walls, a trapezium shortcut helps: (side a + side b) ÷ 2 × the distance between them. If the shape is truly irregular, split it into triangles from one corner, or let drawing software calculate the polygon for you. If the sizes come from a hand sketch, check first that they add up: see how to draw a floor plan from a hand sketch.

Curved walls and bay windows

For a half-round bay, use half the area of a circle: π × r² ÷ 2, where r is half the width of the opening.

Example: a half-round bay 2.40 m wide. r = 1.20 m. Area = 3.1416 × 1.20 × 1.20 ÷ 2 = 2.26 m². Add that to the rectangle of the room.

Most bays are not a full half circle but a flatter arc. Measure the width of the opening (the chord, c) and how far the curve sticks out at the middle (h). For a shallow arc, two thirds of c × h is close enough for a floor plan:

Example: an arc 3.00 m wide that sticks out 0.50 m. 2 ÷ 3 × 3.00 × 0.50 = 1.00 m². The exact segment formula gives about 1.02 m², a difference you would not show after rounding to one decimal.

A bay with three straight sides, common in British homes, is a trapezium: (front width + back width) ÷ 2 × depth.

How to convert square meters to square feet

One foot is exactly 0.3048 m, so one square foot is 0.3048 × 0.3048 = 0.09290304 m². From that:

FromToMultiply byExample
m²ft²10.76414.70 m² = 158.2 ft²
ft²m²0.09291,500 ft² = 139.4 m²
mft3.28084.20 m = 13.78 ft (13 ft 9 in)
ftm0.304812 ft = 3.66 m

Convert the final area, not each side after rounding. If you round 4.20 m to 13.8 ft and 3.50 m to 11.5 ft and multiply, you get 158.7 ft² instead of 158.2. Small, but a client with a calculator will spot it.

Room area versus house area: countries measure differently

A room's area on a plan is simple. A house's official area is not, because each country has its own rules for what counts. The same house can have a noticeably different total in Amsterdam and in Atlanta. Always ask the client which standard applies and draw accordingly.

The Netherlands: NEN 2580 and the measuring instruction

Dutch listings use the usable area (gebruiksoppervlakte) based on NEN 2580, as worked out in the Meetinstructie Gebruiksoppervlakte Woningen used by Dutch agents. Key rules:

  • Measure per floor at floor level, inside the outer walls and the walls shared with neighbours.
  • Interior walls count. The total per floor is the whole area inside the outer walls, so adding up the room areas gives a lower number than the official total.
  • Floor where the ceiling is lower than 1.5 m does not count. That is why Dutch attic plans show a 1.5 m line.
  • A stairwell or void of 4.0 m² or more is deducted.

The room areas you put on a Dutch plan are measured on the inside of each room. The official usable area is the agent's or a surveyor's job. More in floor plans for Dutch real estate.

The United States: ANSI Z765

For single-family homes, the US standard is ANSI Z765 (current edition 2021), which Fannie Mae requires appraisers to use for gross living area. As summarised by the Wisconsin Realtors Association:

  • Measure each level to the exterior finished surface of the outside walls.
  • Take measurements to the nearest inch or tenth of a foot, and report the final area to the nearest whole square foot.
  • Finished areas need a ceiling height of at least 7 feet. Under a sloped ceiling, at least half the room's finished area must reach 7 feet, and nothing under 5 feet counts.
  • Space partly or completely below grade is a basement and is reported separately from above-grade living area.

ANSI Z765 does not apply to apartments and multifamily buildings.

Everywhere else

Other countries and regions have their own rules or professional guidelines. If the client does not say which one, ask before you deliver. A plan drawn on outside measurements for a Dutch client, or on inside measurements for a US appraiser, will come back.

Common mistakes

  • Mixing cm and m in one sum.
  • Rounding too early. Round the result, not the sides.
  • Adding room areas and calling it the house area. Walls, hallways and, depending on the standard, stairwells make the difference.
  • Ignoring height. An attic with a sloping roof has floor that does not count in the Netherlands below 1.5 m, and in the US below 5 feet.
  • Counting a balcony or garage as living area. Most standards report outdoor space and garages separately.

How Dinoplan helps

As soon as walls enclose a room, Dinoplan calculates its inside area. It shows the area per room and the total per floor, and puts an area table on the PNG or PDF with one tick. Under a sloping roof it draws the 1.5 m and 2.0 m lines. For Dutch homes there is an overview following the measuring instruction: living area, other indoor space, outdoor space and external storage, per floor and for the whole project. That overview is calculated from your drawing. It is not a measurement report, and Dinoplan does not apply ANSI Z765. See the features and pricing.

Frequently asked questions

How do I calculate square meters of a room?

Measure the length and width on the inside in metres and multiply them. A room of 4.00 × 3.25 m is 13.00 m².

How many square feet is 1 square meter?

10.764 square feet. The other way round, 1 square foot is 0.0929 m².

How do I calculate the square meters of an L-shaped room?

Split it into two rectangles, calculate each, and add them. Check by taking the bounding rectangle and subtracting the missing corner.

Why is the house area bigger than all rooms added up?

Because most standards count more than the rooms. In the Netherlands interior walls count in the usable area; in the US the house is measured to the outside of the outer walls.

Do I measure inside or outside the walls?

Per room, on the inside. For the official house area it depends on the country: inside the outer walls in the Netherlands, outside the outer walls for US single-family homes. Ask the client.

Does an attic with a sloping roof count as floor area?

Partly. In the Netherlands floor under 1.5 m height does not count. Under ANSI Z765, nothing under 5 feet counts and at least half the room must reach 7 feet.