Guides
Floor plan symbols and abbreviations explained
Short answer: on a floor plan, thick filled lines are walls, a quarter circle at an opening is a door and its swing, a straight line along the wall is a sliding door, and two or three thin parallel lines in a wall are a window. Stairs are a row of narrow rectangles with an arrow pointing up, a dashed line is something overhead, and an arrow with an N is north. Abbreviations differ per language: BR, BA and W/D on US plans; mk (meter cupboard), cv (boiler) and wm (washing machine) on Dutch ones.
There is no single worldwide symbol set for sales floor plans. Formal standards exist, such as the United States National CAD Standard, which includes a large symbol library for construction drawings. Listing plans rarely follow them strictly. What follows is the common practice you see on real estate plans in Europe and North America, and what clients expect when they read yours.
Walls
A floor plan is a horizontal cut through the floor at roughly one metre height, seen from above. Everything the cut passes through is drawn as a section: that is why walls are thick and filled. Outer walls are usually thicker than inner walls, and on a good plan the difference is visible. A wall drawn thinner or thicker than its real size changes the room sizes, so draw walls at their real thickness.
Low walls and half-height partitions are often drawn with a lighter fill or an outline only. A dashed line in the floor area means something above the cut: a beam, a void, a roof overhang or the edge of a sloping ceiling.
Doors and door swings
| Symbol | Meaning | Drafting tip |
|---|---|---|
| Gap in the wall with a straight line and a quarter arc | Hinged door. The line is the door leaf open at 90°, the arc shows the path of its edge. | The arc shows which way the door opens and which side the hinge is on. Get it right: buyers use it to place furniture. |
| Two leaves with two arcs | Double door, for example French doors to the garden | Check whether both leaves open or one is fixed. |
| Straight line next to the opening, parallel to the wall | Sliding door, running along the wall | Show on which side the door slides. |
| Door leaf disappearing into the wall, often dashed | Pocket door, sliding into the wall | No arc, but the wall must be thick enough. |
| Zigzag line | Folding or bifold door | Common on wardrobes and wide garden openings. |
| Gap with no leaf | Opening or archway | Make clear it is not a missing door. |
On a Dutch plan, a balcony door or a French balcony (Frans balkon, a full-height window with a railing) is shown like a door or window in the outer wall. Ask the client if you are not sure which it is from the photos.
Want to try it? Open the sample home, no account needed.Want to try it on your computer? Email yourself the link.
Windows
A window is a thin double or triple line inside the wall, where the glass sits between the lines. The opening in the wall is as wide as the frame. Some plans add a thin line for the sill on the inside. A bay window sticks out of the wall line with its own angled or curved outline. Roof windows are often drawn dashed, since they are above the cut.
Stairs
A stair is a row of narrow rectangles, one per tread. The arrow shows the walking direction and points up. On many plans a diagonal break line cuts the stair where the horizontal cut passes through it: the part beyond the line is above the cut and sometimes dashed. On the floor above, the same stair appears at the same spot, usually with an arrow pointing down or a label DN.
The stair is also the best check that floors line up. If the stair is not in the same place on the ground floor and the first floor, one of the two plans is off. The opening in the upper floor (the stairwell) is not floor area; mark it separately.
Fixtures and appliances
Fixed parts of the house are drawn because they stay: kitchen units, sink, hob, toilet, washbasin, bath, shower and often the boiler. Loose furniture is drawn only to give a sense of size. Common symbols:
- Kitchen: a strip of worktop about 60 cm deep, with a sink (one or two bowls) and a hob (four circles). The fridge is often a square marked REF.
- Bathroom: a rectangle with rounded inside for the bath, a square with a cross or a drain dot for a shower, an oval for the washbasin and a toilet seen from above.
- Laundry: squares marked W and D, or WM and DR on Dutch plans.
- Heating: a radiator is a thin rectangle against the wall; the boiler is a small square, often labelled.
Furniture sizes for the drawing are in our guide to standard furniture dimensions.
North arrow, dimension lines and scale
North arrow. An arrow with an N shows how the house sits on the compass. Buyers use it to see whether the garden or balcony gets sun. Put it on every floor, in the same rotation.
Dimension lines. A thin line with ticks, dots or arrows at the ends and a number in the middle. The number is the distance between the ends. Watch where the ends sit: on the inside face of the walls means an inside measurement, which is normal on sales plans. Sales plans usually show metres with two decimals (4.20 m) or feet and inches (13'9"). Architect's drawings often use millimetres without a unit (4200).
Scale. A printed plan may say 1:100: one centimetre on paper is one metre in reality. On a screen that scale is lost as soon as someone zooms, so a listing plan relies on its dimension lines and room areas, not on a ruler.
Common English abbreviations
| Abbreviation | Meaning |
|---|---|
| BR, BD, BED | Bedroom; MBR or MB is the main bedroom |
| BA, BATH | Bathroom |
| ENS | Ensuite (bathroom off a bedroom, UK) |
| WC | Toilet |
| LR, DR, KIT | Living room, dining room, kitchen |
| CL, CLO, WIC | Closet, walk-in closet |
| W/D, W, D | Washer and dryer |
| DW, REF | Dishwasher, refrigerator |
| WH | Water heater |
| FP | Fireplace |
| UP, DN | Stairs up, stairs down |
| CH | Ceiling height |
Dutch abbreviations and terms for Dutch clients
If you draw for agents in the Netherlands, you will see these on sketches and existing plans. They vary per drafter, but these are the most common:
| Dutch | Meaning |
|---|---|
| BG | begane grond, ground floor |
| 1e verd. or 1e | eerste verdieping, first floor (the floor above the ground floor) |
| mk | meterkast, the cupboard with the utility meters and fuse box, usually in the hall |
| cv | place of the central heating boiler (cv-ketel) |
| wm | washing machine connection |
| dr or dt | dryer |
| toil. or wc | toilet |
| bk or badk. | badkamer, bathroom |
| slpk | slaapkamer, bedroom |
| m², m³ | square metre (area), cubic metre (volume) |
On the final plan, Dutch clients usually want full room names in Dutch, such as woonkamer, keuken and overloop. The full list is in floor plans for Dutch real estate. Dutch attic plans also show lines at 1.5 m and 2.0 m ceiling height, because floor under 1.5 m does not count in the Dutch measuring instruction. See how to calculate square meters.
Drawing symbols a client can read without a legend
- Use one style for every floor: same wall thickness, same door symbol, same fonts.
- Draw every door with its real swing and hinge side.
- Give the stairs an arrow pointing up, and put the stair in the same place on each floor.
- Name every room, in the client's language.
- Use abbreviations only where a full word does not fit.
- Add a north arrow and say which floor each drawing is.
Our floor plan checklist has these and more as a printable page.
How Dinoplan helps
In Dinoplan you drag doors, windows and stairs onto a wall and set the width with the handles. You choose the swing direction, a sliding door, a balcony door or a French balcony. Stairs get a walking direction, and the floor below shows as a light shadow so stairs line up. Dimension lines, room names, areas and a north arrow go on the export, in the client's style. Dinoplan does not follow an official symbol standard such as the National CAD Standard; it uses a calm style common on sales plans. See the features and pricing.
Frequently asked questions
What does the curved line at a door mean on a floor plan?
It shows which way the door swings and how much space it needs. The straight line is the door in its open position.
How is a window shown on a floor plan?
As two or three thin parallel lines inside the wall. The glass sits between the lines.
Which way does the arrow on stairs point?
Usually up, in the walking direction. On the upper floor the same stair may show an arrow down or the label DN.
What does a dashed line on a floor plan mean?
Something above the cut: a beam, a void, a roof overhang, a roof window or the edge of a sloping ceiling.
What is MK on a Dutch floor plan?
The meterkast, a cupboard with the utility meters and fuse box, usually near the front door.
Is there a standard for floor plan symbols?
For construction drawings there are standards, such as the United States National CAD Standard. For real estate listing plans there is no binding standard; drafters follow common practice and the client's style.